PAA-05-0544
8684000890544
Tinta Beach and Pool Shade System
Tinta Beach and Pool Shade System, for beach, pool, garden and children It adds comfort and aesthetics to play areas. With a height of 2.1 m from the ground, a width of 300 cm and a length of 600 cm, it provides shade for 5 sun loungers; The aluminum and stainless steel structure provides effective protection against UV rays.
Highlights
- ◆Standard with a capacity of 5 sunbeds system
- ◆Easy installation and disassembly
- ◆Free project drawing, assembly and transportation service
Dimensions
Ground clearance 2.1 m; Shade width 300 cm, length 600 cm.
Technical Specifications
1- ANCHORING (On Concrete) A minimum of 20 cm thick concrete floor is required for the Tinta Shade System to be mounted. The anchoring system to be installed consists of a 75 cm long, 2.8 mm thick pipe mounted on a Ø 420 mm diameter x 10 mm thick steel flange plate, and is galvanized. The anchor is mounted to the concrete surface with 6 x 18 mm x 200 mm bolts using chemical anchors (in-concrete). If the ground where the Tinta Shade System will be installed is not concrete, a 50 cm deep anchor hole measuring 80 cm x 80 cm is dug, high-dosage concrete is poured into it, and the anchor is installed precisely, thus creating the system's infrastructure. This steel anchor is mounted on a Ø420 mm diameter x 5 mm thick steel flange with 6 bolts of 18 mm x 450 mm, and is galvanized.
2- COLUMNS AND CANTILEVERS The columns and cantilevers of Tinta Shade Systems are manufactured from 6082 grade aluminum. They are coated with electrostatic paint. The column profile has a diameter of Ø 210 mm and a thickness between 7 mm and 10 mm, and is specially designed for the system. The aluminum column top cover and column flange cover are produced from polyethylene using an injection molding system. The aluminum cantilevers are 495 cm long, Ø 70 mm in diameter, and 5 mm thick. All connecting elements that connect the columns and cantilevers are specially designed.
All elements connecting the radius pipes carrying the shade fabric are made of stainless steel.Shade System Technical Specifications – Main ConstructionAll supporting columns and consoles forming the system frame are manufactured from special alloy 6082 grade aluminum and coated with electrostatic paint.All the connecting fittings of the radius aluminum tubes carrying the awning fabric are made of stainless steel. Anchor elements are made of steel and are galvanized.Shade FabricThe fabrics used in Tinta Shade Systems are made of high-strength polyethylene yarn.
Shade fabric is attached with 6 mm stainless steel PVC coated rope.
It is stretched.| Woven | It is woven from high-density polyethylene yarn. Resistant to UV rays. |
|---|---|
| Weight | 300 gr /m2 |
| Value | 195 N- 247 |
| Value | 2900 |
| Value | 95% |
| Value | Warp 54% – Weft 56% |
| Duration | 3 Years (Against manufacturing errors) |

