MM-02-0520
8684000890520
Tinta Parking Lot Shade System (High Vehicles)
Tinta Parking Lot Shade System, for high vehicle groups It is an aesthetic and comfortable way to protect against heat and sun. Made of aluminum and stainless steel, the system protects your vehicle from UV rays while adding a modern touch to your architecture; it is extremely easy to assemble and disassemble.
Highlights
- ◆Aluminum and stainless steel construction
- ◆UV protection
- ◆Easy assembly and disassembly
- ◆Free project drawing for private area
1- Anchor (On Concrete) the Tinta Shade System Requires a Minimum Concrete Floor Thickness of 20 cm for Installation. the Anchor System to Be Installed Consists of a 75 cm Long, 2.8 mm Thick Pipe Mounted on a Ø 420 mm Diameter X 10 mm Thick Steel Flange Plate, and Is Galvanized. the Anchor Is Mounted on the Concrete Surface with 6 X 18 mm X 200 mm Bolts Using Chemical Anchors. (In Concrete) If the Floor Where the Tinta Shade System Will Be Installed Is Not Concrete; a 50 cm Deep Anchor Hole Measuring 80 cm X 80 cm Is Dug, High-Dosage Concrete Is Poured Into It, and the Anchor Is Mounted Precisely, Thus Creating the System's Infrastructure. This Steel Anchor Is Mounted on a Ø420 mm Diameter X 5 mm Thick Steel Flange with 6 Bolts of 18 mm X 450 mm, and Is Galvanized.
2- COLUMNS AND CANTILEVERS The columns and cantilevers of Tinta Shade Systems are manufactured from 6082 grade aluminum. They are coated with electrostatic paint. The column profile has a diameter of Ø 210 mm and a thickness between 7 mm and 10 mm, and is specially designed for the system. The aluminum column top cover and column flange cover are produced from polyethylene using an injection molding system. The aluminum cantilevers are 495 cm long, Ø 70 mm in diameter, and 5 mm thick. All connecting elements that connect the columns and cantilevers are specially designed.
All Elements Connecting the Radius Pipes Carrying the Shade Fabric Are Made of Stainless Steel.Shade System Technical Specifications – Main ConstructionAll supporting columns and consoles forming the system frame are manufactured from special alloy 6082 grade aluminum and coated with electrostatic paint.All the connecting fittings of the radius aluminum tubes carrying the awning fabric are made of stainless steel. Anchor elements are made of steel and are galvanized.Shade FabricThe fabrics used in Tinta Shade Systems are made of high-strength polyethylene yarn.
Shade fabric is attached with 6 mm stainless steel PVC coated rope.
It is stretched.| Woven | It is woven from high-density polyethylene yarn. Resistant to UV rays. |
|---|---|
| Weight | 300 gr /m2 |
| Value | 195 N- 247 |
| Value | 2900 |
| Value | 95% |
| Value | Warp 54% – Weft %56 |
| Duration | 3 Years (Against manufacturing defects) |
If you wish, you can send a photo of your private area via our WhatsApp line, and we can draw our shading project according to your area free of charge. You can reach us through our contact page.

